As we all know, there are many fast door induction methods, such as infrared induction, radar detection, geomagnetic ring induction, etc. the production process of fast door installation under this different magnetic induction method is also different. Let's talk about the installation process and common problems of optical magnetic induction of fast door.

1.在安裝快速卷簾門的光學磁感應系統軟件時，先要將光學發亮器和反射板水準固定不動在快速卷簾門框兩邊，隨后將光電開關電纜線聯接到電氣控制柜接線端子排，依照標號開展聯接就可以。

1. When installing the optical magnetic induction system software of the fast rolling shutter door, first fix the optical illuminator and reflector horizontally on both sides of the fast rolling shutter door frame, and then connect the photoelectric switch cable to the wiring terminal block of the electrical control cabinet, and carry out the connection according to the label.

2.那該怎樣開展布線呢?當電氣控制柜接線端子排無GND插口時，可將藍線聯接到G點布線口應用，在光電開關一條線聯接到G點后，高速門降落究竟，光電開關就會有數據信號，物塊遇到紅外感應，快速門門體升高。若光電開關一條線聯接到X5時，快速卷簾門門體降落究竟后，光電開關信號不好，物塊遇到紅外感應時無姿勢，這時候表明路線布線不正確，需馬上糾正。

2. How to carry out wiring? When there is no GND socket in the wiring terminal block of the electrical control cabinet, the blue line can be connected to the G-point wiring port for application. After a line of the photoelectric switch is connected to the G-point, the high-speed door will drop after all, the photoelectric switch will have data signal, the object block will encounter infrared induction, and the fast door body will rise. If one line of the photoelectric switch is connected to X5, the photoelectric switch signal is poor after the fast rolling shutter door body falls, and the object block has no posture when encountering infrared induction. At this time, it indicates that the route wiring is incorrect and needs to be corrected immediately.

3.當快速卷簾門光電開關電纜接入電氣控制柜后，打開開關電源，發亮器顯示燈會閃爍，翠綠色燈說明光學感應開關可一切正常應用，淡黃色燈時表明數據信號未指向，手動式前后左右調節光電開關與反射板水準部位，待二者處在同一水準部位，信號發射器回到數據信號為信號燈，這時候就能夠一切正常應用。

3. When the photoelectric switch cable of the fast rolling shutter door is connected to the electrical control cabinet, turn on the switching power supply, and the display light of the illuminator will flash. The emerald green light indicates that the optical induction switch can be used normally. The light yellow light indicates that the data signal is not pointing. Manually adjust the leveling position of the photoelectric switch and the reflector from front to back and left to right. When they are at the same level, the signal transmitter returns to the data signal as the signal light, At this time, everything can be used normally.

4.在快速卷簾門光學感應開關安裝進行后，以便確定其應用實際效果，也要對光電開關開展功能測試，檢測時，若物塊歷經控制器，光學顯示燈為淡黃色，高速門門體升高不降低，當物塊離去磁感應區的時候，光學顯示燈為翠綠色，門體廷時后全自動降低。

4. After the installation of the optical induction switch of the fast rolling shutter door, in order to determine the actual effect of its application, the function test of the photoelectric switch should also be carried out. During the detection, if the object block passes through the controller, the optical display light is light yellow, and the door body of the high-speed door does not decrease when it rises. When the object block leaves the magnetic induction area, the optical display light is emerald green, and the door body automatically decreases when it is closed.

以上就是為大家介紹的有關濟南車庫門的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.mwss.com.cn

The above is the detailed introduction of Jinan garage door. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.mwss.com.cn